Wholesale Jogger Sets: A Buyer's Guide for Boutiques & Resellers

Stacks of folded matching hoodie and jogger sets on a table with a tape measure, clipboard, and fabric swatch

What Wholesale Jogger Sets Really Are

A jogger set is a hoodie (or crewneck) and a jogger sold as a matched pair, cut from the same fleece in the same color. In bulk, it comes two ways: packed together as one SKU, or as separates you pair yourself. Sets save you the headache of matching. Separates give you flexibility when a color is hot but one half sells faster than the other.

If you're leaning toward separates, start with the top. Your urban hoodies carry the look, so judge the hood shape, rib, and drop shoulder first, then build the bottoms to match. Either way, ask the same question before checkout: will the top and bottom still look like a set after ten washes?

Fabric Weight: Where the Money Hides

Weight tells you most of what you need. Fleece is measured in GSM (grams per square meter). As a typical range, midweight sits around 280 to 320 GSM, and what most streetwear buyers call heavyweight runs roughly 350 GSM and up. Heavier fabric hangs better, holds a print, and feels like it cost more. It also costs you more per unit and ships heavier, so price it in.

Check the inside too. Brushed fleece should feel soft and even, not patchy. Pull the cuff and the waistband. If the rib bounces back, you're good. If it stays stretched out, your customer's joggers will sag by week three. Ask for a physical sample and wash it twice before you commit to quantity.

Color matters just as much as weight. Dye lots shift, and a charcoal hoodie from one run can sit a shade off a charcoal jogger from another. That's how a "set" turns into two random pieces.

Antoine’s Rule: Antoine's Rule: Buy the top and bottom from the same dye lot in the same run, or don't call it a set.

Build a Size Curve, Not a Guess

New buyers order evenly across sizes. That's a mistake. Most boutique customers cluster in the middle, so your curve should bulge there. Here's an example for a 48-piece order of men's sets (adjust for your own customers): S 6, M 12, L 14, XL 10, 2XL 6. That's 48 total, with the heaviest buy in M and L.

Your numbers will shift based on who walks in. A shop near a college campus may skew smaller. A streetwear store with a bigger-fit crowd may push XL and 2XL up. Look at your last three months of sales by size before you place the order, and let that drive the curve instead of gut feel.

If you serve women too, don't just shrink the men's curve. Fit and rise are different, and the right womens sweats will often sell alongside a set as a standalone pickup. Treat it as its own buy.

Price It So the Margin Survives

The basic rule in retail is keystone: sell at double your cost. For sets, aim for that at minimum, because you'll eat markdowns, shipping, and the odd return. Here's a worked example with made-up numbers. Say your landed cost is $30 per set, counting product, freight, and any duties. Retail at $70 gives you $40 gross margin per set, roughly 57%. Drop it to $55 for a sale and you're at about 45%, which still works. Run the same math at $42 landed cost and that $55 sale price stops making sense.

Your price point also depends on your lane. If your customer shops for fit, quality, and culture, a heavyweight set can carry a premium. For a good look at how that customer thinks, check this men's streetwear hoodie and sweatshirt selection and notice how much the cut and weight drive the price.

Build your price from landed cost up, not from what a competitor posted. Their sourcing isn't your sourcing.

Planning to Print? Buy Blanks Like a Decorator

A lot of resellers don't sell sets plain. They add a logo, a small chest hit, or a back print, and that changes what you should buy. You want a smooth face fabric, consistent shrinkage, and a hood and pocket that don't fight the design. Before you place a decorated order, run through this screen printing checklist for blank hoodies so you catch ink, fabric, and placement issues early.

Group buyers are a different animal. Schools, teams, and crews want the same look across dozens of people, so consistency beats trend. If that's part of your book, look at uniforms for the staples that hold up to daily wear, and use your jogger sets for the spirit-wear and off-duty side.

Order Smart: Samples, MOQs, and Reorders

Start with a sample set in two sizes and your best-guess color. Wear it, wash it, photograph it. If it looks good on camera and survives the dryer, move up to a first bulk order. Keep that first buy small enough that a miss doesn't hurt, but big enough to hit the supplier's minimum.

Ask three questions up front: what's the minimum per style and color, how long do restocks take, and will the fabric and fit stay the same on a reorder? That last one gets skipped, and it's the one that bites. A winning set is only a winner if you can buy it again and get the same product.

Then track what sells. After 30 to 45 days, look at sell-through by color and size. Double down on what's moving, and don't be sentimental about the rest. Clear it, learn from it, and flip the money into the next run.

Ready to stock heavyweight pieces your customers will actually wear?

Shop Urban Hoodies
Back to blog

Antoine G. | Streetwear Sourcing & Operations

Antoine G. leads operations at Wholesale Urban Wear, specializing in high-volume supply chain management for the streetwear market. He bridges the gap between manufacturing and local business needs, focusing on case-pack fulfillment for hoodies, joggers, and tracksuits. By maintaining steady in-stock programs and fast U.S. shipping, Antoine helps retailers and screen printers secure quality basics with reliable inventory depth. — Read More on Antoine G.'s Bio